Help! My Geothermal System Isn’t Heating Properly

Many people in Lexington are using geothermal systems to heat their homes because of its many benefits over common heating and air conditioning systems. However, all cooling and heating systems wear down with time and geothermal systems are no exception. Even though it will take longer, problems will develop in your geothermal system that could affect its heating mechanism. With temperatures potentially going beyond the freezing point in Lexington, you can’t afford to have your geothermal system breaking down. Some common geothermal heating problems that you can face are:

Geothermal System Won’t Start

Geothermal systems are different from other heating systems due to their settings changing from season to season. These settings decide whether cool air is pushed from it or hot air. The settings of the system also allow it to know if there’s enough cold or heat available in the ground source. If you fail to change the settings on a geothermal system’s thermostat, it may not be able to start. The system might also not start if the current temperature of the room is the same as the temperature set on the thermostat. Changing the temperature even one degree on the thermostat can help start up the system. Need service for your geothermal system in the Bluegrass area, including Lexington, Winchester, Paris, and nearby areas of KY? Call (859) 278-0281 or contact us online for a FREE estimate on a new geothermal system.

Less Heat or Not Blowing Hot Air

Many heating systems face this common issue, however, in geothermal systems, the source of this problem is different from typical heating systems. If the geothermal system isn’t sufficiently keeping up when heating your home, there could be several reasons for its ineffective performance. There could be a faulty wire in the electricity supply. Renewable energy is used to power a geothermal system, but electricity is also used. So, ineffective heating could be due to an electrical problem. There could also be an issue with the heat pump. Typical issues with the heat pump include problems with compressor, antifreeze leaks, and fan problems. Geothermal technicians therefore always check all the electrical connecting and the heating pump to determine the cause of the problem. Contact one of our technicians or visit our geothermal repair page to learn more about how Climate Control can help!

Heat Pump Covered With Ice

As your geothermal system continuously operates, condensation appears. When it’s functioning without any problem, condensation evaporates, however, if there is an issue in the system, condensation may build up and as a result ice may form on the heat pump. The iced pump won’t be able to generate sufficient heat to maintain the warm temperature of your home. The pump may ice up because of absence of refrigerant. If that’s the case, the issue might be resolved when you refill it. However, there could also be a leak that’s causing the refrigerant to discharge. If the problem persists, geothermal technicians should be called for help. If you are beginning to experience any of these problems and think that your geothermal system might breakdown very soon, call Climate Control to investigate the matter. Our NATE-certified geothermal system technicians are available 24/7 to get your system back up and running properly.

24/7 Emergency Service (859) 278-0281

Schedule Service

Schedule Service