Reliable Plumbing in Versailles, KY

Completed Gold Level prepaid maintenance on single-system heat pump with air handler located in attic. Inspected and serviced outdoor heat pump unit (Trane/American Standard, R-410A refrigerant) and attic-mounted air handler, confirmed system age and operational status, verified filter size as 20x20x1 (customer-supplied), documented equipment condition with photographs, and prepared updated quote for scrubber cell replacement as requested.

Completed electrical estimate for residential backup generator installation. Assessed existing natural gas meter infrastructure and utility connection point on exterior brick wall, confirming adequate gas supply capacity for generator integration. Evaluated interior electrical panel location in bathroom/laundry area for transfer switch installation and load center modifications required to support automatic standby generator system.

Replaced failed circulator pump on GEOLINK dual-pump flow center serving geothermal heating system. Performed pressure testing of system components using calibrated gauges to verify proper operating pressures and confirm system integrity after pump replacement.

Performed evaporator coil replacement on residential HVAC system. Accessed unit with assistance from neighbor as arranged. Removed failed evaporator coil and installed new replacement unit. Evacuated system using vacuum pump to proper micron levels, verified with wireless vacuum gauge showing acceptable readings. Recharged system with 17 pounds of R410A refrigerant to manufacturer specifications. Inspected capacitor, copper line connections, and condenser coil during service. Tested system operation and confirmed proper cooling performance upon completion. Total service time was 5 hours.

Performed routine maintenance on 24kW Generac generator unit with 63.5 run hours displayed on Evolution 2.0 control panel. Inspected unit for reported oil leak condition and applied appropriate service stickers per maintenance protocol. Control panel verified operational with AUTO/MANUAL/OFF functions testing normal.

Performed scheduled maintenance on KOHLER 240V standby generator, serial number SGV3234VZ. Ordered required maintenance kit as recommended during previous service visit to complete upcoming preventive maintenance procedures. Unit inspected and found to be in operational condition pending kit installation.

Completed Care Plan tune-up on heat pump and air handler system located in crawlspace. Inspected evaporator coil, ductwork, and electric heating elements, confirming components are operational with typical wear and minor dust accumulation. Scheduled follow-up visit during warmer temperatures to recheck unit performance under cooling load conditions.

Responded to no cooling complaint on 11-year-old AC/furnace system blowing room temperature air. Upon inspection, found evaporator coil heavily contaminated with dust and debris accumulation, restricting airflow and preventing proper heat exchange. Performed diagnostic measurements and documented coil condition with severely clogged fins throughout the heat exchanger surface, consistent with extended operation without maintenance on aging equipment.

Completed Care Plan tune-up on geothermal heat pump system with dual GEOLINK circulation pumps located in basement. Inspected and tested both circulation pumps, verified proper operation of pump controls, and measured system pressures using calibrated gauge to ensure geothermal loop is within manufacturer specifications.

Responded to service call for geothermal heat pump system experiencing high electric bills and continuous operation. System was providing heat but operating inefficiently. Upon arrival, performed comprehensive diagnostics using refrigerant manifold gauge to evaluate system pressures and temperatures across the geothermal unit. Measurements indicated the system was maintaining operational parameters but showing signs of reduced efficiency consistent with a 10+ year old unit. Verified refrigerant charge levels, superheat, and subcool readings on the R-410A system. Documented all pressure and temperature readings for baseline comparison. Advised customer of findings and recommended monitoring system performance. Customer currently enrolled in maintenance care plan with next scheduled maintenance in 2026.

Completed comprehensive Care Plan tune-up on heat pump and air handler system with humidifier located in crawlspace. Inspected and replaced 20x20x1 air filter provided by customer, which showed significant dust accumulation and discoloration. Performed electrical diagnostics using clamp meter, verified capacitor readings at 5 microfarads, and confirmed all system components operating within manufacturer specifications. Humidifier unit #35 serviced as included in maintenance plan.

Completed comprehensive care plan tune-up on heat pump and air handler system located in crawlspace. Performed standard maintenance protocol including inspection of electrical connections, capacitor evaluation, and system component assessment. Customer supplied filter for installation per service agreement #210.

Completed comprehensive Care Plan tune-up service on Club Trio system consisting of three heat pumps and three air handlers. Performed full system diagnostics including electrical testing with multimeter showing proper voltage readings at 30.97V, inspected and verified capacitor functionality with proper microfarad ratings, and confirmed all electrical connections were secure across all units. Replaced air filters as requested: two 16x20x1 filters and one 20x25x1 filter. Verified UV light operation on sunroom unit per customer specifications and confirmed proper functionality. All three systems tested and operating within manufacturer specifications with no issues identified.

Responded to service call for main floor heat pump reported as not heating or cooling properly. Upon arrival, performed comprehensive system diagnostics using refrigerant manifold and micron gauge to assess operating pressures and temperatures. Measured low-side pressure at 66.8 PSI and high-side pressure at 187.5 PSI, with superheat reading of 52.9°F indicating potential refrigerant charge issues or airflow restrictions. Inspected evaporator coil fins, which appeared clean and in good condition. System evaluation completed to determine root cause of heating and cooling malfunction.

Completed dryer vent cleaning service for a unit with the dryer located in the middle of the building, requiring an extended vent run. Accessed the exterior vent termination point using an extension ladder and thoroughly cleaned the lengthy ductwork to remove lint buildup and restore proper airflow.

Completed comprehensive care plan tune-up on two HVAC systems: heat pump and air handler located in garage and laundry room. Performed full system inspection, tested control board operations and verified proper digital display functionality, checked electrical connections and capacitors, and confirmed all components operating within normal parameters. Customer provided two 18x20x1 filters which were installed during service.

Responded to water leak complaint on recently installed Ruud 14.3 SEER 2-stage heat pump system. Upon inspection, identified leaking condensate drain trap assembly with compromised seal at PVC connection point. Disassembled drain trap, cleaned components, resealed connections with appropriate primer and cement, and reassembled drainage system. Verified proper trap configuration and tested system operation to confirm leak resolution with no further water accumulation observed.

Completed comprehensive Care Plan maintenance on two air conditioning units and two gas furnace systems. Performed standard tune-up procedures including airflow measurements at supply registers using digital manometer and electrical diagnostics on HVAC equipment using clamp meter to verify proper amperage draws and system performance.

Completed installation of customer-supplied fixtures including a chrome shower head with adjustable curved arm mounted to existing shower plumbing, a two-handle chrome faucet with porcelain caps installed at bathroom vanity sink, and washing machine hookup. Performed leak inspection of all toilets on property to verify proper seal and flush valve operation, with no leaks detected.

Responded to emergency plumbing service for burst hot and cold water supply lines to garage sink caused by freeze damage. Accessed crawl space and located compromised supply lines. Capped off both the hot and cold water lines and installed shut-off valves for future accessibility and maintenance. Removed the garage sink fixture as requested rather than attempting repair of the damaged lines. All work completed same day to prevent further water damage and restore system integrity.