Reliable Plumbing in Versailles, KY

Responded to water leak complaint on recently installed Ruud 14.3 SEER 2-stage heat pump system. Upon inspection, identified leaking condensate drain trap assembly with compromised seal at PVC connection point. Disassembled drain trap, cleaned components, resealed connections with appropriate primer and cement, and reassembled drainage system. Verified proper trap configuration and tested system operation to confirm leak resolution with no further water accumulation observed.

Completed comprehensive Care Plan maintenance on two air conditioning units and two gas furnace systems. Performed standard tune-up procedures including airflow measurements at supply registers using digital manometer and electrical diagnostics on HVAC equipment using clamp meter to verify proper amperage draws and system performance.

Completed installation of customer-supplied fixtures including a chrome shower head with adjustable curved arm mounted to existing shower plumbing, a two-handle chrome faucet with porcelain caps installed at bathroom vanity sink, and washing machine hookup. Performed leak inspection of all toilets on property to verify proper seal and flush valve operation, with no leaks detected.

Responded to emergency plumbing service for burst hot and cold water supply lines to garage sink caused by freeze damage. Accessed crawl space and located compromised supply lines. Capped off both the hot and cold water lines and installed shut-off valves for future accessibility and maintenance. Removed the garage sink fixture as requested rather than attempting repair of the damaged lines. All work completed same day to prevent further water damage and restore system integrity.

Completed annual generator maintenance and replaced the transfer mechanism in the transfer switch. The generator control panel displayed 119 hours of runtime on the Evolution 2.0 system, which is now operating properly in AUTO mode with WiFi monitoring service activated for one year of remote system oversight.

Replaced REME HALO LED air purification unit under manufacturer warranty. Removed existing unit (model REMEE-LED, S/N Y1URLED430) and installed warranty replacement unit. Packaged original unit in new unit's box with all serial number information intact per manufacturer's warranty claim requirements for complete unit exchange.

Completed scheduled maintenance on a Briggs and Stratton Fortress 12kW standby generator, serial number 4000159080. Performed comprehensive inspection of unit exterior, verified proper mounting on concrete pad, checked electrical connections at transfer switch and meter assembly, and documented equipment condition with photographic records per maintenance protocol.

Responded to error code 179 on Carrier Infinity system reporting operation on emergency heat. Upon inspection, verified heat pump was cycling properly on low stage heating mode with electric heat strips remaining off as designed. Diagnosed error code as false alarm related to thermostat communication issue. Cleared fault code from system memory, confirmed proper refrigerant line connections at outdoor unit, and verified thermostat displaying correct equipment operating status with heat pump functioning as primary heat source. System restored to normal heating operation without requiring emergency heat mode.

Completed comprehensive care plan tune-up on heat pump and air handler system located in crawlspace. Performed thorough inspection of evaporator coils, blower motor assembly, and all accessible components, documenting equipment condition with detailed photographs showing clean coil fins and properly functioning blower wheel with no visible debris or mechanical issues.

Completed residential installation of Durastar 18,000 BTU mini-split system consisting of model DRAW18F2A wall-mounted indoor unit and model DRA1U18S2A outdoor condensing unit. Indoor air handler was mounted on interior wall between two windows per specifications, while outdoor unit was positioned on concrete pad at ground level on rear exterior wall. Line set was secured vertically along exterior brick wall without line hide cover, with press fittings utilized for indoor unit connections in place of standard flares and Nyc-log sealant applied to outdoor unit flare threads. New dedicated electrical circuit was installed to power the system. System was pressure tested, evacuated, charged, and commissioned to manufacturer specifications. All equipment tested and verified operational upon completion.

Responded to service call for non-operational Kohler generator (model #SGV3234VZ, 240V). Upon inspection, found unit completely unresponsive with no test cycle functionality since December. Replaced oil filter (S-CO 550) and performed comprehensive diagnostic testing to restore normal operation. Discussed ongoing maintenance schedule with customer to prevent future issues.

Responded to callback regarding continuous air handler operation and non-functioning humidifier despite thermostat indication. Inspected Aprilaire Model 560 whole-house humidifier and discovered water flow issues in the condensate drainage system. Cleaned drainage components, verified proper water flow through the humidifier, and confirmed system is now operating according to specifications.

Completed installation of a 50-gallon electric tall water heater in basement utility area. Connected copper supply lines and properly vented the unit with appropriate metal vent pipe. Verified electrical connections to junction box with flexible conduit and ensured system was operational before completion.

Responded to customer concerns regarding mold odor during furnace operation. Inspected crawl space area revealing moisture issues with evidence of water damage on wooden structures and improper insulation installation. Identified PVC pipe connection with mineral buildup and assessed the existing air filtration system. Replaced AprilAire filter as requested to address potential IAQ issues.

Responded to no heat call for 3-5 year old electric HVAC system that stopped functioning properly after a recent storm. Inspection revealed significant electrical panel deterioration with pest/rodent nesting material surrounding the breakers, creating a serious electrical hazard. The attic-mounted air handler was functioning properly, but the thermostat was non-operational due to the compromised electrical connection.

Performed annual Care Plan tune-up maintenance on two heat pump/air handler systems located in attic and basement. Inspected evaporator coils for proper condition and conducted electrical testing with clamp meter, obtaining readings of 29.3 amps during operation. Both systems are newly installed under warranty coverage, with a third system discussed for potential addition to the maintenance plan at renewal time.

Completed plumbing repair as requested, with additional work performed as authorized by customer. Inspected wall area near electrical conduit and baseboard vent, addressing plumbing issues in that section. Modified scope of work based on assessment of required repairs.

Successfully installed a complete Bryant two-stage HVAC system, including an 80K BTU 97% efficient furnace, 3-ton 18 SEER2 AC unit with matching evaporator coil, and WiFi thermostat. Replaced existing refrigerant line set that was causing system performance issues and installed a new condensate pump to ensure proper drainage.

Conducted inspection of existing 50-gallon electric water heater located in basement utility area. Unit shows signs of aging with partial insulation wrap and standard pressure relief valve setup. Documented current installation configuration including electrical connections (240V) and plumbing infrastructure with copper supply lines. Provided estimate options for replacement of equivalent electric tank model versus tankless alternatives.

Responded to a commercial property with drain blockage affecting both an apartment and salon. Cleared sink blockage to restore proper drainage, but identified S-trap configuration requiring studor vent installation for optimal performance. Shower drain clearing was unsuccessful; scheduled follow-up visit to further diagnose the issue and coordinate with the hair salon below for comprehensive resolution.