Top-Rated Heating, Cooling in Lexington, KY

Completed Care Plan tune-up on air conditioning system with gas furnace unit located in basement. Performed comprehensive maintenance inspection of HVAC system, accessing unit through main service panel which showed significant dust accumulation on interior components and ductwork. Cleaned and serviced accessible components within the system chamber. Verified customer-supplied 20x20x1 filter was in place and operational. Documented existing conditions including heavy dust and debris buildup on interior surfaces and access points. System operational upon completion of maintenance procedures.

Completed Gold Level prepaid maintenance on single-system home with AC and gas furnace located in basement. Performed comprehensive system inspection including electrical diagnostics using clamp meter to verify amperage draws on both heating and cooling components, checked Platinum UV light operation for air quality enhancement, and conducted standard maintenance procedures per club membership protocol with customer-supplied filter.

Completed comprehensive Care Plan tune-up service on dual HVAC system with air conditioning and gas furnace units located in basement and upstairs closet. Performed full system inspection, tested electrical components and relays, verified proper wiring connections, and inspected outdoor condenser unit. Customer-supplied filters (16x25x1 and 16x25x2) were installed, and both systems were confirmed to be operating within manufacturer specifications.

Performed comprehensive club maintenance on single gas furnace and air conditioning system located in hallway closet. Conducted thorough inspection of blower motor assembly, measuring amp draw at 37.8A and verifying proper electrical operation using clamp meter diagnostics. Removed, thoroughly cleaned, and reinstalled washable filter per maintenance protocol. Tested all electrical connections and motor components to ensure optimal system performance and efficiency.

# HVAC Repair - No Cooling Condition Responded to service call for 15-year-old residential air conditioning system with reported non-functional outdoor fan and lack of cooling. Upon arrival, confirmed compressor was energized but condenser fan motor failed to operate. Performed diagnostic testing of outdoor unit components including capacitor testing, contactor inspection, and motor winding continuity checks. Identified failed condenser fan motor as root cause of no-cool condition. Verified proper voltage supply to unit and confirmed compressor operation remained functional. Replaced defective condenser fan motor with OEM-equivalent replacement unit. Installed new motor, secured mounting hardware, and reconnected electrical connections per manufacturer specifications. Tested capacitor under load and confirmed proper microfarad rating for both compressor and fan motor operation. Energized system and verified proper condenser fan rotation and airflow across condenser coil. Monitored

Completed full residential HVAC system replacement including installation of Carrier 3-ton 16.2 SEER2 Performance Series single-stage heat pump (model 27SPA636A003) on concrete pad with snow legs and electrical disconnect box in backyard against brick exterior wall. Installed Carrier 3-ton air handler with variable speed blower (model FT5ANXC36L00) in basement utility area with 15kW electric heat kit (model AFAEHL15B01A) and Carrier thermostat control. Added Aprilaire media cabinet air filtration system and condensate pump for proper drainage management. Ran insulated refrigerant lines with inline filter connecting outdoor condenser to indoor air handler, installed electrical whip kit and disconnect box for code compliance. Integrated SS2 coil drain safety water sensor with trap, fabricated transitions to existing ductwork system, and removed/disposed of old equipment. Pulled all applicable permits, tested system operation including heating and cooling modes, verified proper airflow an

# HVAC Service Completed Responded to service call for 9-year-old air conditioning system reported as blowing air but not cooling. Upon arrival, performed diagnostic evaluation of the cooling system to identify the cause of insufficient cooling performance. Conducted visual inspection of the indoor air handler unit, verifying model and serial number information from equipment nameplate. Assessed overall system condition and reviewed service history noting previous repair within the past year. Checked electrical connections, wiring harness, and mounting hardware for secure installation and proper operation. Proceeded to attic space to evaluate evaporator coil performance and refrigerant temperatures. Using digital thermometer, measured supply air temperature at insulated refrigerant line, recording reading of 6.0°F which indicated potential refrigerant system issue. This abnormally low temperature reading suggested possible refrigerant overcharge, expansion valve malfunction, or airf

Responded to callback for leak under recently replaced kitchen sink. Upon inspection, identified active leak at drain assembly connection. Disassembled P-trap configuration and drain connections, finding improper seal at basket strainer. Reinstalled drain components with proper sealing, ensuring all PVC connections were secure and watertight. Tested system with running water to confirm leak was resolved. Photographed completed work showing proper P-trap installation and cabinet interior condition. Removed old fittings and materials from site.

Responded to callback for unresolved hot water issue from previous service visit. Inspected crawlspace plumbing system and documented PVC supply line configuration, including valve assembly with red-handled shutoff valve and mounting hardware. Verified proper installation of pipe supports and checked for any leaks or flow restrictions that could be affecting hot water delivery to fixtures.

Responded to non-functional outdoor spigot at 70-year-old residence where fixture had been inoperative for several months. Upon inspection, identified failed hose bib mounted on exterior brick wall above concrete foundation. Accessed supply line from crawl space, locating copper piping and PVC connections behind wall assembly. Removed deteriorated outdoor spigot and assessed mounting location showing signs of age-related wear and moisture exposure at foundation level. Installed new frost-free self-draining hose bib as requested to prevent future freeze damage, ensuring proper pitch for automatic drainage when shut off. Secured fixture to brick wall with appropriate masonry anchors and verified supply line connections in crawl space remained secure. Tested new spigot for proper operation, confirming water flow and automatic drain-back function when valve closed. Documented installation with photographs showing completed exterior fixture and associated crawlspace plumbing connections.

Responded to service call for non-operational whole-home dehumidifier integrated with HVAC system. Upon arrival, confirmed heating and cooling functions were operating normally while dehumidification system was inactive. Performed diagnostic inspection of dehumidifier unit and associated ductwork connections. Accessed equipment compartment and examined internal components, including duct connections, electrical connections, and drainage pathways. Inspected metal ductwork and air handler integration points for proper installation and potential obstruction issues. Noted moisture-related discoloration on vertical channels and accumulated debris in equipment base, suggesting previous condensate management concerns. Photographed equipment condition and configuration for service documentation. Equipment is approximately three years old and requires further evaluation to determine root cause of dehumidifier failure and recommend appropriate repair or replacement options.

Completed Club Single maintenance on 3-year-old HVAC system with indoor unit in basement and outdoor condensing unit. Outdoor unit coils were heavily contaminated with dirt, dust, and debris accumulation, requiring thorough cleaning to restore proper heat exchange efficiency. Air filter showed extensive buildup of particulate matter and was serviced as part of maintenance protocol. System includes AprilAire 800 humidifier. All maintenance tasks completed per club membership agreement specifications.

Responded to service call for broken sewer pipe in half-finished basement with seepage of black water into main basement area. Upon inspection, identified ruptured above-ground pipe at junction point where two underground pipes meet, with water infiltration worsening during rain events. Documented conditions showing exposed pipe in unfinished crawl space area with concrete flooring, cinder block foundation, and visible water damage patterns consistent with intermittent sewage seepage.

Completed comprehensive cooling maintenance and tune-up on a 9-year-old residential air conditioning system located in crawl space. System was found operating properly upon arrival. Performed standard preventive maintenance procedures including inspection of all electrical connections, refrigerant levels, and ductwork integrity. Verified proper operation of all components, checked flexible duct connections and mounting hardware for security, and confirmed system functionality. Unit left in good working condition with no issues identified.

Completed comprehensive Care Plan tune-up on dual-zone HVAC system with equipment located in attic and basement. Performed preventive maintenance on Carrier CNPVP4821ALAMAA unit (2010 installation) utilizing R-410A Puron refrigerant, verified system pressures at 450 PSIG design specification, and inspected all components for proper operation. Customer supplied humidifier pad for replacement during service visit. Verified thermostat programming and operation on Carrier digital touchscreen unit, confirming auto mode functionality with heat set to 68°F and cool set to 80°F, with room temperature reading 68°F at time of service. Both attic and basement systems inspected, serviced, and confirmed operational per manufacturer specifications.

Responded to callback for mini-split system experiencing persistent water leakage following recent maintenance visit. Upon inspection, discovered severe corrosion and deterioration on refrigerant line connections and fittings near the indoor unit. The corroded piping showed extensive rust, pitting, and surface degradation, with compromised insulation indicating prolonged moisture exposure. Documented the damaged components and active leak points causing water infiltration into the drywall and hardwood flooring below.

Responded to service call for 12-year-old tanked water heater in garage with no hot water and active leaking. Upon inspection, identified significant leak at upper pipe connections with visible water damage and towels placed to absorb moisture around copper piping. Assessed unit condition, noting age-related deterioration including oxidation and patina on copper lines and brass fittings. Documented equipment configuration including connections to electrical panel, multiple pipe runs (PVC and copper), and overall system layout. Photographed leak points and surrounding plumbing infrastructure for diagnostic evaluation and replacement recommendations given unit age and extent of failure.

Responded to service call for 16-year-old tanked water heater with reported leaking underneath unit in basement location. Upon arrival, conducted visual inspection of water heater and surrounding area, documenting conditions with photographs. Assessed concrete floor for water damage and traced leak source to determine extent of issue and recommend appropriate repair or replacement options given age of equipment.

Responded to callback for women's bathroom sink with no water flow following previous repair work on pipe tip and running toilet. Upon diagnosis, removed and inspected faucet aerator which was found to be clogged with debris and sediment. Cleaned aerator thoroughly, reinstalled component, and restored full water flow to sink. Tested faucet operation to confirm proper function.

Responded to service call for kitchen faucet leak with unknown location. Upon arrival, performed comprehensive inspection of double-basin kitchen sink system with dual-handle chrome faucet assembly. Identified source of leak at corroded horizontal copper supply line connection beneath sink. Supply lines exhibited significant corrosion, oxidation, and green patina buildup indicating long-term deterioration. Shut off water supply via angle stop valves and assessed condition of all under-sink plumbing components. Documented extensive mineral deposits throughout sink basins, aged drain assemblies, and compromised braided flexible supply lines. Recommended replacement of corroded copper piping, supply lines, and shut-off valves to prevent future leaks and ensure reliable water delivery to faucet system.